When a distressed home owner set out to rectify her rotting timber framed home in Merthyr Tydfil by building an extension on the back of her house, Tarmac were consulted by the contractor to help find a solution for the internal floor.
TOPFLOW SCREED C BELITEX
The pump applied free flowing cement based screed that dries within 14 – 21 days
A cement based, free flowing screed that can be laid quickly, trafficked after just 24-48 hours and dries within 14-21 days. Topflow Screed C Belitex is a solution that provides you flexibility in installation and your overall build programme.
Topflow Screed C Belitex is one of many of our flowing screed solutions. We also offer a variety of free flowing anhydrite screed products. Read more about these alternatives.
Massively reduced drying times
Topflow Screed C Belitex dries within 14 – 21 days versus a minimum of 40 – 75 with other traditional or flowing screed products and it can take foot traffic after just 24-48 hours. This means that floor coverings can be applied sooner.
Fast & easy installation
Up to 120m2 can be laid in 45 minutes versus a whole day with traditional screed plus there is no working on your knees when installing as with traditional screed. There is also no need for sanding the surface afterwards.
Stronger than traditional screed, no reinforcement or manual compaction is required.
Topflow Screed C Belitex can be laid in thinner depths than traditional screed.
Comparable shrinkage with other flowing screeds therefore large areas of up to 250m2 can be laid without the need for jointing making the application of floor coverings much simpler.
Excellent SR2 smooth level surface produced.
Topflow Screed C Belitex has a greater workability open life when installing and is compatible with any type of underfloor heating system, cementitious adhesive and floor covering. It is also suitable for wet room applications. The solution also gives you more flexibility with your build scheduling since it can be installed later in the programme due to its reduced drying time.
Save money on self leveller and underlay due to the SR2 flat surface created.
- FOR USE WITH UNDER FLOOR HEATING
- SUITABLE FOR WET ROOMS
- UNBONDED OR FLOATING FLOOR CONSTRUCTION
- IDEAL FOR BOTH NEW BUILD AND RENOVATION WORK
- SUITABLE FOR ALL RESIDENTIAL AND COMMERCIAL FLOORS CARRYING PEDESTRIAN TRAFFIC WITHIN BS 8204
- SUITABLE FOR SINGLE OR MULTI-STOREY PROJECTS
With a busy schedule of social events to host in the newly built area of Llanfoist's village hall, a speedy solution for a new floor was required.
The contractor was carrying out a refurbishment on a 3 bedroom, semi- detached town house in Penarth and consulted with Minimix about the floor.
Tarmac was approached to advise on a potential flooring solution for a project where there were challenging issues and short timescales involved.
Tarmac's London Readymix team were contacted by Conneely Dry Lining, on the 1st March, with an urgent request from one of their most important clients.
Tarmac's Topflow screed C Belitex is a cement based flowing screed that is easy to install and can accept floor covering at just 14-21 days.